Product Support

Locations Map

Shows a customizable Google map with location markers for all your Participants Database records.

Product Setup

First install and activate the plugin. This will add the “Locations Map” menu item to the Participants Database admin menu. Click that item to open the Locations Map settings screen. The first step is to get your API key.

Getting Your API Keys

To use Google maps services, you must have an API key. It’s no big deal: they are free, you just have to have a Google account, and then set up the API access through Google Developers.

  1. Visit https://cloud.google.com/maps-platform/
  2. Click on Get Started, you may be asked to log in to your Google account
  3. Select Maps, click continue
  4. Select or Create a Project: Just create a new project and give it the name of your website
  5. The project will be created, it can take several seconds
  6. Set up billing: Google requires that you have a billing account in case you start to run up charges (you probably won’t…see below)
  7. The Maps API will be enabled
  8. You will then be given your API key. Copy this and paste it into the “Maps JavaScript API Key” setting in the Locations Map settings.
  9. Go to your Google Cloud APIs Dashboard, make sure you have the right project selected, then on the left, select “Credentials.”
  10. To set up the Geocoding API key, add another API key by clicking on the “Create credentials” button. This will be used only for Geocoding, so give it a name that identifies it for that purpose. Paste it into the “Geocoding API Key” setting.

Static Maps require an additional Google Static Maps Signing Secret key. Instructions for setting that up can be found on this page: Generate a Digital Signature

Google Maps Services is Free—To a Point

For each service used, Google provides a limited number of free loads (every time someone loads a page with a map on it, that’s one load). Unless your site has very high volume, it won’t cost you anything to show maps. This plugin uses three Google services: Dynamic Maps, Static Maps and Geocoding.

Every time a page with a dynamic map is opened on your site, it will generate a Dynamic Map load. You can have up to 28,000 of those per month for free. You’d probably have to be getting several thousand visits a month (with them all seeing your map) to hit that.

Static Maps has higher limits: you’ll get 100,000 free map loads per month with those. Static maps lack the user interactivity of dynamic maps, but they are cheap, fast and really all you need for many applications.

Geocoding also has limits, but it’s not used very often. We only need to geocode when a record is created or updated. You’ll get 40,000 of those for free per month.  If you have a lot of records, you might get over that number when you geocode the entire batch, but after that you’re unlikely to hit charges for geocoding.

Get all the details in the Google Maps Pricing Table…

Once you have the API keys in place, you can show the map in your list and single record displays. A detailed explanation of the plugin’s settings is found under the “Settings” tabs here.

Dynamic Maps or Static Maps?

You should decide whether you need to use Dynamic Maps or Static Maps. They are used differently and result in a different display…here are the pros and cons:

Map Type Pros Cons
Dynamic
  • user interactivity like zoom, panning, street view, change map type
  • location markers
  • info popups on markers
  • more appearance control
  • fewer free loads
  • can take longer to load when viewed
  • more complex display could be confusing or distracting
Static
  • loads instantly, no javascript
  • simple display
  • location markers
  • lots of free loads
  • no user interactivity
  • less responsive: you must define dimensions
  • less control over appearance
  • no marker info popups

Placing Dynamic Maps

Dynamic maps can be placed automatically, without the need for custom templates, by selecting a location in the list or single record displays using the Automatic Map Placement settings. In the list display, the map will show in the selected location (top or bottom) with markers for all the records shown in the list results. A search result will show a repopulated map with markers for the result set.

It is also possible to enable a map display on a specific list shortcode (instead of using the auto placement setting which will place the map on all list shortcodes) by adding the “listmap” attribute to the list shortcode: [pdb_list listmap=true]

The map for the single record shows a marker for the location of that record.

Dynamic Map Shortcodes

If you want to just show a Dynamic map with it’s markers, they can also be shown with a shortcode. Don’t use these shortcodes to add a map to the list display, they are for showing a map on it’s own.

[pdb_listmap] shows a map with all your located records as markers. You can use the “filter” attribute in the shortcode to determine which records are included or excluded.

[pdb_single_map] shows a map for a single record with a marker for its location. You will need to access it’s page using a ?pdb=id type of URL (typically, by using the “single record link” in the list display), so that the shortcode knows which record to show. Or, if you are a coder, you can use it in a custom template and set the record id in the shortcode, using the ‘record_id’ attribute.

Dynamic Map Templates

Dynamic maps can also be displayed using a custom template. The add-on comes with two example templates for showing a dynamic map: pdb-list-dynamicmap-default.php and pdb-single-dynamicmap-default.php You can use them as-is or use them as a starting point for your own custom templates.

If you are already using a custom template, take a look at these examples, you’ll see it’s very simple to add a map to a template.

Placing Static Maps

Static Maps are used in three ways: as a custom form element, the [pdb_list_static_map] shortcode or using a special template.

The Static Map Form Element

Setting up the map as a Participants Database field is convenient if you want to show a small map in a list display or you want the map to be part of the single record display.

Static maps must have their width and height set beforehand. If you don’t define the width and height in the field definition, it will use the global map height setting for the width and the height (resulting in a square map).

You can set several parameters in the field definition to set up your map:

  • ‘width’ sets the width, in pixels for your map display
  • ‘height’ sets the height in pixels
  • ‘located_only’ when set to true will only show a map if the record has been located (i.e., has latitude and longitude data)
  • ‘zoom’ sets the zoom level of the map; if omitted, the zoom level is determined by the global zoom setting. Values here range from 1 to 20.
  • ‘maptype” can take one of 4 values: roadmap, satellite, terrain, hybrid and determines the type of map display to use
  • ‘center’ allows you to set a default center for the map: if there is a marker present, it will center on that marker. You must use the | (pipe) character instead of a comma to separate the latitude and longitude values. 


For example: this field is configured to show a map of width 650 pixels wide by 500 pixels in height, showing a hybrid map centered on San Francisco.

Zoom levels range from 1 to 20, this is from the Google Maps documentation to give you an idea what to set it to:

  • 1: World
  • 5: Landmass/continent
  • 10: City
  • 15: Streets
  • 20: Buildings

Note: map sizes are limited by your Google API plan type. Normally, this is 650 pixels, but if you upgrade your plan, you can get up to 2048 pixels. Details here…

You can manage the appearance like any other Participants Database field. If you want the map to show up in your list display, make sure the map field is configured to do so. For single displays, it will appear like any other field.

Map fields do not display in signup forms or record edit forms.

The [pdb_list_static_map] Shortcode

This works much the same as the [pdb_listmap] shortcode, only it shows a static map. The shortcode uses the ‘width’ and ‘height’ attributes to set up the dimensions of the map display. You can use these attributes in the shortcode:

  • width – in pixels
  • height – in pixels
  • zoom – sets the base zoom level of the map, 1 to 20 as explained above.
  • center – longitude | latitude for the center of the map, defaults to auto-centering the map on the markers
  • maptype – can be roadmap, satellite, terrain, or hybrid

For example, to show a map that is for someone’s address, you could use a setting like this:

[pdb_list_static_map zoom=15]

The the map display here is static, that means that the user won’t be able to zoom it themselves.

The Static Map Template

This add-on includes a special template for showing all your record markers in a static map. If you need to set up a custom list template using a static map, you can use the included pdb-list-static-map-default.php template as your starting point or as an example of how to include the map.

To use the static map template in your list shortcode, use a shortcode like this: [pdb_list template="static-map-default"].

Configuring the Appearance of the Dynamic Map

There are several preferences for determining how the dynamic map will look. First, you can select the Map Style, which is the color scheme of the map. There are several available, and it is possible to create your own color scheme if you want.

The Map Height setting sets the size of the map display. The map will always try to be as wide as possible, filling the available horizontal space. It is necessary to give the map a specific height to determine how much vertical space it will take. The usual size is around 300 pixels, this will look good on most handheld devices. You don’t want to try to show a map that is larger than the screen size of the device since the user can scroll within the map window.

Map Controls determine what the user can do with the map. You have several controls that you can enable or disable depending on your needs. It is probably a good idea to have as few of these enabled as possible to avoid unneeded clutter in the display.

Each location is marked on the map with a Marker Icon, you can select the type of icon and color.

Marker Info Pop-Ups show information from the record when the marker is clicked on or hovered over. You can configure the content of the info box: it’s possible to put pretty much anything you want to show in there, the template gives you a way to determine which fields are shown and how they are laid out in the box.

Geocoding

Most of the time, your records will have an address that defines its location. Geocoding takes this address information (from anywhere in the world!) and converts it to the latitude and longitude values needed to place the marker on the right spot on the map.

You’ll need to tell the plugin which fields are your Address Fields, it uses the data in those fields to determine the location. It’s possible to locate markers with partial information, such as a state or city, but it will be more accurate with a complete address.

If your records already have latitude and longitude data, you don’t need to use geocoding, just make sure the Latitude and Longitude Field settings tell the plugin where to find that info.

Mass Geocoding

If you already have a records when you set up the map plugin, you’ll want to geocode those so that their markers will be placed. The Geocode All Records button does this for all the records in the database. The operation takes place in the background, so once you start it, you can do other things. You’ll need to refresh the page after a few minutes to see the results of the operation.

API Key Restrictions

API keys should be restricted to prevent their use by others. Key restrictions will only allow the website that is authorized to use them to gain access to the API and its services.

For our purposes, there are only two kinds of restrictions we are concerned with: “HTTP referrers” and “IP addresses.” HTTP referrer restrictions are for requests from the client side, and so this includes Dynamic Maps and Static Maps. IP address restrictions are for requests directly from the web server to Google: this is what the Geocoding API needs. Here is a handy chart:

Plugin Feature Google API Restriction to use
Dynamic or Static Maps Maps JavaScript API HTTP Referrer
Geocoding (Location Markers) Geocoding API IP Addresses

Setting Up Restrictions

HTTP Referrer restrictions should contain the domain name of your website. If you want to use the same key on multiple sites, you can add more domains. It’s a good idea to use wildcards in the setting…for instance, for this site, I would use: https://*.xnau.com/* so it will cover all subdomains and paths in the site.

IP Address restrictions require that you know the IP address of your web server. You can usually find this on your hosting control panel, or you can just ask your web host. In some cases, there are multiple possible IPs that your server could use, so you should add all of them to the restrictions setting for the API key.

Product Settings

Google Maps API Settings

Maps JavaScript API Key

You must have an API key to use Google’s map service. Instructions for getting your API key are found under the “Instructions” tab.

Geocoding API Key

If you are using restrictions on your API keys, you will need to use a different API key for Geocoding. Without restrictions, you can use the same key for both. Restrictions are optional, but it is recommended you set them up to prevent your API keys getting misused.

Google Static Maps Signing Secret

This key is optional, and you’ll only need it if you’re using Static Maps and want to increase the number of free loads you can have. More information on digital signatures here…

General Map Settings

Default Zoom Level

Normally, the map will auto-zoom to include all the markers. If the map has no markers, this is the zoom level to use. This also works as a minimum zoom level so that your maps won’t be zoomed in too close if there is only one marker or they are all clustered in a single location.

Details that would be seen at several example zoom levels:

  • 1: World
  • 5: Landmass/continent
  • 7: Country
  • 10: City
  • 15: Streets
  • 20: Buildings

Default Location

The center of the map is normally determined by the markers. If there are no markers, this location will be used as the center of the map.

Map Height

All maps require a height setting. Choose a value in pixels that looks good in the normal display you are using. This value can be overridden by individual maps. The maximum size available here is 650 pixels, unless you have a premium Google API plan.

For dynamic maps, the width of the map will be determined by the display, so it will be responsive to the viewing device screen. Static maps require a fixed width value, which is set in the configuration of the static map. Static maps can be made responsive with appropriate CSS, your responsive theme may take care of that for you.

Marker Icon

Choose the style of marker icon from a preset list of icons.

Custom Marker Icon

If you want to use a custom icon, put the URL to it here. This means it needs to be hosted on a server. The easiest way to do this is to upload the image to your site’s media library. To get the URL, open the image in the media library editor, then copy the URL for the image (seen in the upper right of the edit screen).

An icon should be a 32×32 pixel PNG with a transparent background.

Dynamic Map Features

List Display Automatic Map Placement
Single Record Automatic Map Placement

This selection inserts the dynamic map in your List or Single Record displays in the location specified.

This will be active in all single or list displays. If you need to selectively display a dynamic map, you must use a custom template. The plugin includes some default custom templates which you can use as-is or as a guide to creating your own.

Map Style

This chooses a color scheme for your map. There are several built-in ones to choose from, or you can build you own. See the “Custom Map Style” setting for details.

Map Controls

Dynamic Map Controls

There are several different controls available to users on a dynamic map. This setting lets you decide which ones will be available. Note that this can’t prevent users from zooming and panning using their keyboard and mouse, all this does is hide or show the specific on-screen control.

Enable Marker Info Pop-Up

Checkbox to enable/disable informational pop-ups for markers. These pop-ups show information from a record when its marker is clicked or hovered over.

Show Paginated List Markers

When checked, the markers displayed in the list map will only be the ones that correspond to the current page of record in the list. If unchecked, all markers from the whole list will be shown, ignoring pagination.

Keep this checked if you want to declutter a map with too many markers.

Marker Info Show Action

Determines the action that will show the informational pop-up: click, the marker must be clicked on or hover, the info box for each marker is shown as the pointer hovers over it.

Marker Info Template

This mini-template determines which pieces of information will be included in the informational pop-up and how it will be formatted. It uses the same “value tags” as available in Participants Database email templates. Each tag will be replaced by the record data in the named field.

You can use simple HTML in the template, but it may break if you try to put too much in there.

Custom Map Style

Here is where you can add your own custom map color scheme. You’re expected to paste a valid JSON object, an error will result if there are syntax issues with the JSON object.

There are several online services that make developing your own map style fairly easy.

These services will all generate the JSON for you: just copy and paste into the custom map style to use it.

Geocoding

In order to place markers on a map, it is necessary to know the coordinates for each one. In most cases, your records will have an address of some kind. Geocoding is the process of taking a descriptive address of a place and converting it to the geometric coordinates of the place on the globe: the latitude and longitude.

Enable Auto-Geocoding

When enabled, a record is automatically geocoded when it is created or edited. You can disable this if your records already contain latitude and longitude information.

Address Fields

To geocode a place, we need the address information. This setting tells the geocoder which fields to use to find the coordinates. The address can be a mailing address or any other kind of descriptive address that is normally used. The address can be incomplete (for instance, just a city or even a country), the geocoder will place the coordinates as accurately as it can using whatever information it is given.

For example, if you give the geocoder the only name of a city, it will place the marker in the center of that city. If given a locality (such as “Hell’s Kitchen”) it will place it in the center of that locality, so even if your records don’t contain complete addresses, markers can be meaningfully placed.

Latitude Field
Longitude Field

Select the two fields where this information is held in your records. Normally, the plugin will add these fields and you won’t have to change this setting. If your records already have coordinate fields, you can set those here so the plugin knows where to get the information to place the marker.

Geocode All Records

When you first set up the plugin, you will probably need to get the coordinates for all the records that are already in the database. This button will start the process of geocoding all of your records.

It does this in the background, so you won’t see much happening until it is done. Refresh the page after a minute or two to see the results of the bulk geocoding operation.

Remember, there is a limit to the number of free geocoding requests you can make, and if you have a large database you could easily reach that limit if you perform this operation multiple times. You should only have to do this once.

F.A.Q.

My records won't geocode, I just get the "Processing complete. 0 records geocoded." message when I try to geocode my records.

There are several things that could be going wrong here, so here is a checklist of things to verify:

  1. API Keys: Make sure you are using the correct key and that the key is set up for the correct APIs. The keys should be set up on the Maps JavaScript API and the Geocoding API. You must have a valid billing account set up with Google for the key to work.
  2. API Key must be valid for the domain making the request. This will be under the “restrictions” for the key. If it is unrestricted, it will also work.
  3. If the keys are restricted, you must use a separate key for the Maps JavaScript API and the Geocoding API. The JavaScript API must use HTTP Referrer restrictions and the Geocoding AP must use IP Address restrictions. Make sure these restrction settings are correct. If you turn the restrictions off, and then it works, you know the restriction settings are not correct.
  4. If you have Participants Database debugging on, you may see pertinent information on the geocoding attempt. For example you may see pdbgmap\geocoder::geocode request failed with status: REQUEST_DENIED which indicates a problem with the API Key.
  5. Check the Geocoding Address Fields setting. This must be a comma-separated list of valid field names. Do not include any non-address fields. For example:
    address, city, state, country
  6. Your records must have enough valid data in the address fields to locate the record. Check a single record with a good address, it should geocode when saved so you can see if that record is working and make any changes to get it working. Even just a country and city is enough to place a pin. If you find it geocodes with just the city and country, then maybe something about the street or house address is confusing. There is a Google geocoding tester you can use to see if you’ve got a readable address.
  7. If after you’ve verified the first 3 items on this list and your address tests OK on the geocode test page, you still can’t get it to geocode your records, it can be helpful to do a little debugging. In the Participants Database settings under the advanced tab, select “plugin debug” in the Enable Debugging setting. Now attempt to geocode your test record in the backend record editor (you only have to save the record to do this). The log (debugging log item in the Participants database admin menu) will tell you what errors happened during the geocode process. Most of the time, the problem is with the API keys. Setting up the keys is a bit complex and everything has to be correct for them to work.
I'm using Locations Map with Combo Multisearch, and the map shown in the list doesn't update to show markers for the search results.

Make sure you are using the latest versions of both Participants Database and the Location Map plugins, there was a bug in earlier versions that prevented the map fields getting updated when using Combo Multisearch.

Don’t try to use the [pdb_listmap] shortcode to display the map on a page that has the [pdb_list] shortcode with a search…they won’t be in sync. If you want to show a searchable list and a location map that follows the search results, it is best to use the “Map Auto-Placement” feature or the dynamic map list template for that.

Another approach is to use a custom template. While Locations Map does include a list template that adds a dynamic map, for Combo Multisearch, you need to combine the template that Combo Multisearch uses and the Locations Map one.

I have put such a template together, it is available here…

Take a look at the linked page if you are unfamiliar with the use of custom templates in Participants Database.

How can I prevent the automatic list placement from happening for a specific shortcode?

If you want to control whether the dynamic map shows with a list display on a per-shortcode basis, you need to turn automatic placement off for lists. Then, in the list where you want the map to show, use the “dynamicmap-default” template, like this:

[pdb_list template=dynamicmap-default]

I'm getting a blank display when using the listmap shortcode.

Depending on how your map markers are configured, you can run into memory issues when too many markers with info windows are displayed. This problem is most likely to happen when using the [pdb_listmap] shortcode because this shortcode will show all possible markers by default.

If you have a lot of records with markers that include info windows that have a lot of content, it’s very demanding on the system to display all of that. If you’re getting memory errors, you’ll see it as a missing map display or even on the backend you can’t save the page with the shortcode.

There are some things you can do to avoid the problem:

  • Slim the info window down: don’t try to show so much in the window. you can fix this in the info window template setting.
  • Push less HTML into the info window by using the “Marker Info Tags as Raw Values” setting. You may need to adjust the info window template if you do this.
  • Use a filter in the shortcode so that you’re not trying to show all the markers. [pdb_listmap filter="state=CA"]
  • Show fewer markers: you can add the list_limit parameter to the shortcode…for example: [pdb_listmap list_limit=100] which will limit the number of markers to a maximum of 100: still a lot of markers!
I want to add a KML file to the map, is that possible?

Yes, it will require some coding knowledge because you’ll need to set up a filter callback to insert the KML. I’m providing some very brief instructions here, it will be up to you to get it working on your site.

The general reference at Google for adding a KML to the map configuration is here: Displaying KML

The filter to use is pdbgmap-additional_map_code which allows you to add a javascript object to the map configuration. Here is an example of how to use this filter based on the example in the page linked above:

To add your own KML, you will need to upload it to your site, then use the absolute URI to the file to add it to the map.

Sometimes, the dynamic map loads very slowly and/or doesn't show all the pins.

This can happen after importing a large number of records. What is going on is if there are a lot of markers that aren’t cached yet, the map will slow way down to build them all. If it doesn’t finish building all the markers before it’s time to display the map, not all of them will make it. The map will display only the markers that have been built and cached.

There are two solutions to this. First, the map will progressively cache uncached markers, so every time the map is loaded, more uncached markers are added to the cache. In 2 to 3 loads (depending on how many markers you are trying to show) all the markers will be cached, and map load times will be good.

Second, you can “prime” the marker cache manually. To do this, go to the Locations Map settings page, and add “&prime_marker_cache” the the URL in the location bar of your browser. The hit return. This will begin a background process to load the marker cache. It may take a couple of minutes, but once this is done, all your markers will load quickly.

The marker cache will also be automatically primed if you change the “Marker Info Template” setting because this changes all the markers. Wait a couple of minutes after changing this setting before loading your map.

Priming the cache is not something you need to to more than once. You may need to do it after importing a large number of records.

Support Discussions for Locations Map

  • Roland,
    The map in question is located at https://cleancourts.org/mapping/
    While the plugin has been adding pins, I noticed that some pins were not appearing where a pin should appear.

    1. Does it matter participants are entering their county, NOT their city?
    2. Should I post the results of the debugging here?

    Thank you

    • Hi Bob,

      Don’t post debugging , we’re still trying to see what problem you’re having. Mostly the debugging info is for you to see what the geolocation code tells you about the last pin it added, I won’t want to look at your logs unless there is a specific problme we’re chasing and I’ll ask you to post the log in that case.

      If a pin is located with a general location such as country or city, then the pin gets placed in the geographical “center” of the location, so in the center of the country, for instance. If you want the pins to be located more precisely, you need to give it more prescise location information. The best is to include country, city and address.

  • Hi, I´m using the Location Map to display a list of model flying fields in Sweden. One map displays all with a popup with info window. This works OK. On another page I have a list with no map but links to a detail page with a map for that single location. It has been working OK until recently but now the map opens in maximal zoom in. Can´t find a way to solve this. Probably this was introduced after upgrade to Location map 1.8.

    WP is 6.1.1 and PHP 8.2.1, PDB is 2.4.6 and Location map is 1.8..1.

    • Hi, just backed to Location Map 1.7.9 and then the map behaves OK even in the detal page. The error seems to be introduced in v 1.8 or v 1.8.1?

      Regards
      / Kjell

      • Thanks for this, looks like I missed a detail on the last update, I’m issuing a fix for this right away.

        • Thanks! All is back to working. PDB and the various add-on are super useful.

  • How to you fix this error when it appears?
    The map seems to appear fine but the error below appears:

    Participants Database/PDb Locations Map:

    Geocoding could not be performed for this reason: API keys with referer restrictions cannot be used with this API.

    • Hi Bob,

      That’s a new one to me. I do know that you can use restrictions on the Geocoding API keys, so maybe you need to look at the configuration of the key. I know that restrcting the Geocoding API key using an IP address works. You need to use the IP address of your website hosting machine.

      Als, make sure you’ve got the right kind of key, should be for the “Geocoding API”

  • I’m trying to see if this is going to be a good fit for us – is there a demo page that incorporates a database search with map results? We’d like to be able to type in a city in the search, like Atlanta, and have the map go to the city and have pointers where the participants are located.

    Below the map we’d see a list of all the participants in Atlanta. Is there a page like that anywhere to check out?

    • Hi Wade,

      Thanks for your question, I never put up a demo page for the locations map plugin, but I plan to do that in the next couple of days…because of everything that’s going on on my main site,it’s not as simple as just putting the shortcode on a page.

      If you have any specific questions about the plugin, let me know.

      • Roland, thanks for getting back to me!

        I’m very happy to hear that a demo of the locations map will be forthcoming. I look forward to checking it out to ensure it meets our needs.

        In another conversation (I can’t recall if it was here or on the wordpress support section) but a happy customer of yours shared a link to their implementation (probusclub.net/clubs/) and I wondered if something wasn’t set up correctly.

        The problem I noticed is if I search for a city, the map isn’t changed to that city. The map remained unchanged (not zoomed into a location or anything).

        Thank you,
        Wade

        • Hi Wade,

          I did set up a demo page for the locations map, but it’s not working yet: I have a security feature that rebuilds the database from scratch periodically and it wipes the location info.

          Anyway, to your question: the latest update addresses the issue of the markers not getting updated when using pagination or search. That should all be working now.

          You should just try the plugin, if it doesn’t do what you need, I’ll give you a refund.

        • BTW, I got the demo working now.

  • Hi Malcolm, my apologies, looks like there is a typo in the script.

    Line 106 of cache.php should be:

    if ( array_key_exists( $key, $this->geocode_list ) )

    I’m issuing an update right away.

  • Getting the following critical error when saving record

    Warning: Undefined property: pdbgmap\cache::$geoode_list in /home/openmorris/public_html/wp-content/plugins/pdb-locations-map/pdbgmap/cache.php on line 106

    Fatal error: Uncaught TypeError: array_key_exists(): Argument #2 ($array) must be of type array, null given in /home/openmorris/public_html/wp-content/plugins/pdb-locations-map/pdbgmap/cache.php:106 Stack trace: #0 /home/openmorris/public_html/wp-content/plugins/pdb-locations-map/pdbgmap/cache.php(106): array_key_exists(4133536957, NULL) #1 /home/openmorris/public_html/wp-content/plugins/pdb-locations-map/pdbgmap/cache.php(85): pdbgmap\cache->get_cached_geocode(‘IP6+9BE’) #2 /home/openmorris/public_html/wp-content/plugins/pdb-locations-map/pdbgmap/geocoder.php(219): pdbgmap\cache::get(‘IP6+9BE’) #3

    etc

    /home/openmorris/public_html/wp-admin/admin.php(34): require_once(‘/home/openmorri…’) #15 {main} thrown in /home/openmorris/public_html/wp-content/plugins/pdb-locations-map/pdbgmap/cache.php on line 106
    There has been a critical error on this website. Please check your site admin email inbox for instructions.

  • I have been using the map function for some time and it works a treat. I recently changed the URL slug and Post slug source fields. I ran the tool to update all proxy post records and under directory tools and Update all slugs under permalinks. All new records are great but the old links are still the same. I have managed to fix this from the search results page by manually changing the slug in the proxy post records in word press and the is fine.
    My challenge is the pin on the map. The link still points to the old slug configuration. I cant find where to access this to update the old records.
    All new records are fine. I’m happy to manually update them if I know where to find the reference.
    Thanks

    • The first thing to do when changing slugs or permalinks to go to the WordPress Permalinks settings page and save those settings. No need to change anything, saving it will rebuild all the permalinks.

      • Thanks Roland. That all worked fine. All the permalinks were created perfectly. The issue I have is that when I click the pin on the map (after siltering a search) it goes to the old permalink. I have found the only way I can refresh this is by saving the record and it seems to force a refresh, but I have thousands of records and thats hugely time consunming to manually edit them one by one. I tried manually uploading the csv with an update in an unused filed to try and force the rcords to refresh but the old link still comes up

        • Hi Carrie,

          What is happening is the map pins are cached, and so refreshing the cache should correct them all. You can force a cache rebuild by making a change to the “Marker Info Template” or while you’re on the Locations Map setting page, add “&prime_marker_cache” to the end of the URL and hit return, this will tell the plugin to rebuild all the marker into windows.

        • AMAZING!!! Thanks so much. worked a treat and saved me heaps of time. Thank for that

  • I was able to get the mapping option to work as a static map where the pins appeared as users were added.
    I wanted to change the Map to dynamic so added some Google API’s which I thought were what was needed. Note: The API’s are not referred to by Dynamic so I added what I thought was.

    Problem is once I added the addition API’s and changed a few settings in the Map section at
    https://cleancourts.org/mapping/ new additions stopped being added as pins and dynamic options ie. Zoom
    did not appear. Any suggestion where to look for solution or how to resolve this?

    Do I need to remove the static API?

    • It sounds like the plugin is not configured to show dynamic maps. To change your displays from static to dynamic: if you’re using a “Map” form element, you need to delete that because this field can’t display dynamic maps. Then you need to enable dynamic map placement in the configuration. Finally, you need to make sure the records are correctly geocoded with the latitude and longitude. This may require running the “geocode all records” utility. Check the Locations Map documentation for the details.

  • I’m immensely impressed by this extension. It’s very well documented, and works very nicely. Right now, I’ve got only one outstanding issue. I was able to use a custom image for my marker icons, and that worked fine. However, now I find I cannot cause the map to display any other marker icon than my initial custom selection (which I no longer like). If I change to one of the icons available in the configuration dropdown, that newly selected icon does not display. Nor can I get the map to display a different custom image, either. I seem to be stuck with my initial choice of a custom image, without any way of changing it. I’ve purged my WordPress cache, and I’ve cleared by browser (Chrome) cash to no avail. All I can see is my ‘old’ custom icon, a bluish (#0079ba) icon with a black surround. I’m trying to display a custom bluish (#0079ba) icon with a white circle in it.

    I’ll enter the URL of the page I’m developing below. The pages on this subdomain are not ‘in production’ as yet.

    • The markers are persistently cached, so you need to clear the cache. Easy way to do that is make a change to the the “Marker Info Template” this will force the marker cache to be rebuilt.

  • Hi Roland

    Everything is working great apart from one tiny bug
    I have set field website address
    When marker icon is clicked sometimes it opens the target website in a new tab but sometimes it does not open in a new tab and the visitor is redirected away from my website to the target website in the same tab.
    I have noticed the failure to open a new tab happens more often when the visitor zooms in on the map to the magnification scale which enables the user to read the street addresses in the map.

    • What do you have for your marker info template?

      If you use your Browser Developer Tools inspector, you should see that the “a” tag has the attribute target="_blank" which will open the URL in a new tab. Try it at different zoom levels to understand better what is going on.

      It is important to note that this behavior is determined by the browser and the user’s preferences. You don’t have direct control over this, so you can’t count on it opening a new tab.

      • Ok thanks for the advice I’ll drill down into the code at different map resolutions and to see if I spot anything.
        The wordpress theme I’m using is

Leave a Reply to Roland Barker Cancel reply

Your email address will not be published. Required fields are marked *

Would you like to be notified of followup comments via e-mail? You can also subscribe without commenting.