Product Support

Combo Multi-Search

A Participants Database Add-On providing two different configurable multiple-field search capabilities.

Product Setup

The Combo Multisearch Plugin offers two main search control types: a single text input (like a search engine) or a set of selectors/checkboxes/text fields that provide a search term for each field. Both search types may be used, but in most cases, you’ll be using one or the other.

Setting up the Combination Search

Combo Search provides a single-input search that will look in multiple fields for a match. Use this search type in situations where a simple easy-to-use interface is desired to search the database.

To set up the Combo Search, you’ll need the names of all the fields you want searched with the user’s input. Type the names as a comma-separated list into the “Combination Search Fields” setting. To disable the combo search, leave the setting blank. The “label” and “placeholder” settings give you two ways to prompt the user. The “label” is shown alongside the text input, and remains visible when the user types in their search. The “placeholder” is shown inside the text input, and disappears when the user begins to type in a search. A placeholder is good when you don’t need to explain much and want a clean, simple interface. The label is good for situations where you want to explain a little bit what the search is for. You can use either, neither, or both if you want.

Combo Search Modifiers

The “combo search modifiers” are a set of radio buttons to allow the user to set the type of search desired: “any,” “all,” or “phrase.” When enabled, these radio buttons will be shown next to the combo search input. There is a default search type that will be initially selected, and this is also the search mode that will be used if the combo search modifiers are not shown.

Autocomplete

“Autocomplete” is also known as “autosuggest” and provides the user with a list of suitable search terms. The list of suggested search terms is shown as a pop-up window when the user begins typing, and the list is pared down as the user types in more letters. The list of autosuggest words is drawn from the database, so it can reliably guide the user to search terms that will yield results. The fields that the autocomplete terms are drawn from is defined in the “Combo Search Autocomplete Fields” setting. It is a list of field names like the “combination search fields” setting. This means that the combo search can search on fields that don’t contribute to the autosuggest. This is helpful in cases where some of the fields searched contain blocks of text, which could add a lot of useless terms to the autosuggest list.

Multi Search provides a comprehensive interface for searching on multiple fields using a separate input for each field. This is best for situations where a precise, complex search is needed (such as a technical database) or in situations where you want to show the viewer what kind of information they can search by (for example, a services directory).

Starting with version 2.0, the multisearch fields are defined in a special interface under the “Multi Search Fields” tab in the plugin’s settings. In this new interface, each field in the multisearch can be customized in several different ways, changing how it looks, how the user may interact with it, and how it finds matches. Which options are available to a field depends on the type of field it is as defined in Participants Database.

If you already had Combo Multisearch set up and are updating from an older version, your fields will still be configured as before, only now you can fine-tune how each field works.

shows how to interact with the multisearch fields interface
Configuring the Multi Search Fields

On this page, you configure which fields will appear in the multisearch and in what order. The display shows a list of all the fields configured for the Multi Search so you can edit the parameters of each one. You can add as many fields here as you want, you can also also delete and re-order them.

Field Parameters

Each field in the list of fields has its own parameters where you can change how it is presented or how it works. There are several parameters, and which ones are available to each field depends on the field type. Here is a description of the parameters:

  • Label – This defaults to the normal field title, but if you want to give it a different label in the search interface, you can do that here.
  • Help Text – defaults to the field’s help text, but you can choose a different help text for the search interface.
  • Attributes – allows the addition of HTML element attributes, such as the “required” attribute to selectively make fields required in the search interface.
  • Input Type – depending on the original field type, there will be several different ways the field can be shown in the search interface.
  • Include Label in Result Summary – when checked, the field’s label will be shown along with the searched-for value in the search result summary.
  • Database Values in Selector – for any kind of selector input type, instead of showing the configured field options, the options shown in the control will be drawn from the database.
  • Show “Any” Option – for selector input types, enabling ths shows an option that will allow for any value in the fields: this is essentially a “reset” for the selector, removing it from the search.
  • “Any” Option Label – when the “any” option is shown, this is how it will be labeled. You can leave it blank for a blank option.
  • Multiselect “Or” Mode – (only for multiselect input types) if this is checked, the search result can match any of the values selected, instead of needing to match all of them when using “filter” mode. This setting makes no difference when not using filter mode because the values will be treated as an “or” in that case anyway.

Multi Search Field Input Type

Some field types will have several options available for the “Input Type” selected in the Multi Search Fields interface. A text field can be shown as a text input (of course) but also as a dropdown selector that shows a list of values taken from the database entries. Dropdown fields can be shown as a dropdown or as a multiselect, giving the user the ability to select several possible matches for that field.

Normally, a list shortcode configured to show the Combo Multisearch control will show all the fields you have configured in the Multi Search Fields interface. It is possible to determine on a per-shortcode basis which fields will be shown in the interface, as explained in the “Showing the Search Control” section. If you want to do this, you must configure all the fields you will show in all shortcodes, and then use the “search_fields” attribute in the shortcode to determine which of the configured fields to show in that particular display.

Filter Search Mode

The Combo Multisearch has two general modes of operation: Filter Mode on or off. With filter mode “on,” all chosen search values must match the record’s values for it to be included in a search result. If filter mode is “off,” a record will be included in the results if any of the provided search terms matches the record’s values.

When filter mode is on, any multi search fields that are configured with the “multiselect or” option will only require that one of the selected values in that field is a match. With “multiselect or” deselected, all the options selected for that field in the search must match.

Each search type, combo or multi, has a “Whole Word Match Only” switch so that text searches will only match a complete word in the search, not portions of a word. For multi-search controls, this only affects text inputs where the user types in the search term.

Returning to the Search Results

Under the General settings tab is an option to enable restoring the previous search when returning to the search page. This is convenient for users who need to navigate away from the search page and wish to return to the same page of results. If this is unchecked, the search page will be reset every time it is loaded.

Showing the Combo Multi-Search Control

The Combo Multisearch Add-On provides its search capabilities through the use of a special template. There is a template for the list display and for the stand-alone search display. Once the plugin settings are defined, the template must be called in the shortcode like this:

[pdb_list template=multisearch ]

The plugin now also includes a table-less responsive template for the list multisearch shortcode:

[pdb_list template=multisearch-responsive ]

Or for the standalone search like this:

[pdb_search template=multisearch ]

If you are using the pdb_search shortcode, be sure to read Using the Search Shortcode as it can be tricky to configure.

It is possible to define the list of multisearch fields to search in the shortcode, drawn from the list of fields configured in the mutisearch fields setup. For example:

[pdb_list template=multisearch search_fields='company,city,state']

If you have both combo and multi searches configured, the combo search will only show if “combo_search” is included in the field list.

If you want a particular shortcode to show the combo search only, you can set that up like this:

[pdb_list template=multisearch search_fields='combo_search']

It is not possible to determine which fields are included in the combo search in the shortcode due to search optimization.

If you need to have the search control in a different location then where the results are displayed, you can do that with the [pdb_search] shortcode. You need to use the “target_page” attribute to tell the search shortcode where the results are to be displayed. The [pdb_list] shortcode is used to display the results. (Check this page for more on using the search shortcode…) For example, if your results are displayed on a page named “listings” then your search control shortcode will be like this: [pdb_search template=multisearch target_page=listings]. That shortcode can be placed anywhere. If you want to put it into a sidebar widget, you’ll need a plugin that will allow a shortcode in a widget. Then, on the “listings” page, put [pdb_list]. There is no need to set the template to multisearch unless you want another search control to appear at the top of the results.

Target Instance

In cases where the [pdb_list] shortcode is on a page with other Participants Database shortcodes, you may need to set the “target_instance” attribute to target the specific list shortcode where you want the results to appear. To find the target instance value, you must inspect the HTML. At the top of the list display, you will see a classname in the wrapper such as “pdb-instance-2” That means the list is instance 2, and you would need to put that value as the target instance in the search control shortcode, like this: [pdb_search template=multisearch target_page=listings target_instance=2].

F.A.Q.

Can I use both the Combo Search and Multi Search at the same time?

Yes, you can, but the set of fields selected for the Combo Search Fields should be different than the fields configured in Multi Search Fields. It will still work, but the results might not be as expected because the combo search will override the multi search if both are searching on the same field.

Is it possible for the user's last used search to be restored when they return to the search page?

Yes, there is a setting under the “General” tab in the Combo Multisearch settings called “Remember the Last Search” and if checked, it will store the search parameters for the last search on the user’s browser. This means that even if they leave the site and come back later, the last search they used will still be there. If “Clear” is clicked the stored search is erased.

I want to pre-load the search terms when linking to the search page. How do I do that?

Yes, it is possible to place the search terms in the URL, and they will pre-load into the search form.

For Multi Search, each field you want to preload a search term into needs to be named and given a value. For example, you want to take the user to the search page set up to find all the brewpubs in Seattle. Your link would look something like this:

https://xnau.com/search/?city=seattle&business_type=brewpub

The “city” and “business_type” fields would then be filled with the vales in the URL. Of course, the fields named must be configured to appear in the Multi Search inputs.

You can do the same for the Combo Search, but there is only one field, named “combo_search” so if you wanted to do the same kind of thing as our example above, you could use a URL like this:

https://xnau.com/search/?combo_search=seattle%20brewpub

You’ll notice the %20 in the search term: this is code for a space, this is needed because URL’s cannot contain spaces. Take a look at this reference to learn more about using query strings in URL’s.

I want to combine Combo Multisearch with Locations Map to show search result locations in the map. How can this be done?

Right now this doesn’t work using the “auto placement” of the locations map. You can get it all working together using a custom template I’ve created a template that will do the job here:

https://gist.github.com/xnau/39afbf647d78e85a7acdba4b0da30530

You’ll need to download that template, and place it where Participants Database can find it. This is explained here:

Using Participants Database Custom Templates

Once that’s done, change your shortcode to something like this:

[pdb_list template=multisearch-map]

I've got a very large database, are there any problems with this plugin with large databases?

Mostly, the size of the database is not going to matter at all, MySQL is pretty efficient with large databases.

There is one setting that will be affected, that’s the “Autocomplete” feature of the Combo search. For a very large database, you could get some memory errors with this feature. Two things you can try for that problem: limit the number of of fields that are going into the autocomplete (using the “Combo Search Autocomplete Fields” setting) which will cut down on the number of terms loaded into the autosuggest. Second, if your database is realy, really large, you may need to turn autocomplete off altogether.

If you are concerned with database performance issues, it’s a good idea to tune your server for better performance. You may want to ask your web hosting provider about that, it is a fairly technical subject and requires server configurations you may not have access to.

Support Discussions for Combo Multisearch

  • At some point in the past few months the multisearch on our site stopped working. There’s no error message, just nothing when a search is attempted. We’re using this shortcode: pdb_list template=multisearch-cust. I’ve also tried pdb_list template=multisearch. Previously it worked perfectly.

    The debugging log has this: PDb_List::_setup_iteration list query: SELECT p.id, p.website, p.country, p.city, p.curriculum, p.accreditation, p.religious_affiliation FROM wp_participants_database p ORDER BY p.city DESC

    Any help is appreciated. Thanks.

    • Probably a problem with the javascript or perhaps your php sessions are not working. This can happen if new plugins are installed that interfere with the javascript or perhaps the configuration of your server changed.

      Can you send me a link to the page so I can see what’s going on?

      send it to support@xnau.com if you need it private.

  • Hi Roland,
    Just a quick question: Can the plugin be used in the background (dashboard)?
    Thanks

    • If you’re asking if the Participants Database plugin can be used as an admin-only plugin, the answer is yes. All the functionality of the plugin is accessible in the admin section, no need to expose it to the frontend at all.

      Although, since you’re asking on this page, Combo Multisearch is frontend only.

  • Im trying to use the shortcode [pdb_list template=multisearch search_fields='combo_search'] but it returns both the combo AND the mutlisearch fields?

    • That should work, I just checked it…are you using the latest version of Combo Multisearch?

  • Hi Roland,

    I noticed that if the Last Name/Maiden Name are used in the combo/multisearch shortcode and the Last Name field is not filled out in the record, and you search only under First Name, the search results substitute “localhost:8888/TestSite/single/?pdb=1453” in the Last Name column instead of being blank. When you click on the search record to see the detail it comes up with the correct detail as it should with the Last Name blank.

    Here is the shortcode: [pdb_list template=multisearch suppress=true]

    I also notice that the “chosen multi dropdown/other” does not let me enter any “other” name. It tells me that it wasn’t found. I was expecting it to accept the entry.

    • Thanks for pointing this out…when a field that is designated as the “single record link field” is shown in the list display, it is supposed to have the link to the single record page. If the value in the field is blank, it just shows the link itself. This may not be ideal, but the “single record link field” setting isn’t compatible with a column that could have blank values. If your system allows blank last names, it may not be the best choice for your single record link field because this will happen whenever a record with a blank field is displayed in a list. The reason it does this is because it is assumed that the link to the single record is important enough to be accssible in every case.

      The Chosen “other” controls don’t allow for a type-in entry. You can use the “Database Values in Selector” setting on the field if you want all the “other” values to be available to the search.

      • I understand. I can easily require that the user enter the last name if it is used in the combo search terms.

        Regarding the Chosen Dropdown Multi /Other Menu, I was expecting it to allow for entry of an “Other” value when creating a new record. I tried eliminating the option to save the value as something else, but that didn’t help.

        So I understand, you are saying that when SEARCHING “Other” would not be available as a choice? Otherwise, I am not sure how one would get additional values into the field.

        • Now that I look at it I see that I made a mistake to upgrade the “chosen” js to a version that does not support the “other” type fields. I will need to issue an update that will fix this.

Leave a Reply to RTG Cancel reply

You have to agree to the comment policy.

Would you like to be notified of followup comments via e-mail? You can also subscribe without commenting.